Goulds GT10 Irri-Gator self priming centrifugal pump 1 HP SAME DAY SHIPPING

  

Goulds GT10 Irri-Gator self priming centrifugal pump - 1 HP. 115/230 Volts, 1 Phase, 1-1/2" NPT Suction, 1-1/2" NPT Discharge. Specifically designed for the following uses. Once pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe.

Pumping resumes once the water level rises above the end of the suction pipe. Back pullout design allows disassembly of pump for service without disturbing piping.

Two compartment motor for easy access to motor wiring and replaceable components. Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. Compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Electro-coat paint process is applied inside and out, then baked on.

Four (4) bolt, back pull-out design. Tapped openings providedfor vacuum gauge and casing drain.

Can be operatedcontinuously without damage. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. Pipe connections: 1 1/2 NPT suction 1 1/2 NPT discharge.

Capacities: to 110 GPM at 5 foot suction lift. Reprime capabilities: to 25 feet suction lift. Maximum working pressure: 125 PSIG. Maximum water temperature: 140_ F (60_ C). Rotation: clockwise when viewed from motor end.

NEMA standard open drip proof. Single phase: Ê-1_ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.

Optional TEFC motors are available.